How to Make Bell Bottom Jeans

There are many different ways to create a pair of bell bottom jeans. The easiest way is to cut up a discarded pair of jeans. For the bell-bottom effect, you want the bottoms to be wider than the rest of the pants. In order to do this, you’ll need two or three yards of fabric. This yardage is dependent on the type of pant that you’re making. For example, full-length pants will need three and a half yards of fabric. Capri or Bermuda-length pants will require two yards. A pair of bell bottom jeans will require a mere 1/4 yard of fabric.

how to make bell bottom jeans

Once you have a pair of bell bottom jeans in mind, you can begin the process of making your own. You can start by making a triangle from a scrap piece of fabric. Then, you’ll need to fold the edges under and stitch them together with a zigzag stitch. You’ll want to do this to prevent fraying. Then, you can place the triangle inside out, lining the right side of the pant leg with the right side facing out. Once this is done, you can turn your pants inside out and you’re all set to go out on the town.

When sewing bell bottom pants, remember to use a 1/2-inch seam allowance and to stitch in a wide zigzag. This will prevent fraying and ensure that the pants don’t look weird. For the leg opening, the pant should arch out slightly from the knees and calf to fall to the ground. To keep them looking symmetrical, you may want to try a different style to complement your new pants.

Before sewing your bell bottom pants, you need to make sure that you know what size you’ll need. Measure the length and width of your pants before you start. Then, you can trace it onto freezer paper. After that, you can sew it on the bell bottom pant leg. It will be a little bit tricky to stitch the bell bottoms perfectly. But it is not as difficult as it sounds. You just need to know how to sew a pair of bell bottom jeans.

Once you have the bell bottoms you’re looking for, you’ll need to rip the legs to pin the point. This will give you the width and length you need to cut your bell bottoms. Now, make the pattern of your pants by cutting a freezer paper piece. After you’ve cut the outer part of the pant leg, you’ll need to pin it in place using straight pins.

Next, measure the inside seam of your pants. This is the measurement for the bell bottoms. You should also measure the length of the legs and thighs. Then, you need to pin the legs so that you can determine the width and the length of your bell bottoms. You can then trace the pattern on freezer paper and cut the bell bottoms out. The bell bottoms are not just for girls, they’re for men as well.

To make a pair of bell bottom jeans, you’ll need to cut a triangle out of canvas material or pattern fabric. You’ll then need to rip the leg to determine the length and width. Then, you can cut a pattern of the triangles. Once you have the triangles cut, use straight pins to attach the triangles. Once you’ve finished the process, turn inside out the pants to see if they look right.

If you’re unsure of how to make a pair of bell bottom jeans, start by ripping a pair of pants. Once you have the measurements, measure the length and width of the bell bottoms. You should also measure the waist to decide which style will fit you best. The length of the bells should be long enough to allow for the hips to expand. After the bells have been cut, you can sew on the remaining two legs.

Before you start sewing, you should measure the outside seam of your pants. This will help you determine how long and wide the bells will be. Then, cut a pattern from freezer paper. Mark a straight line down the middle of the pant leg and perpendicular to it. Once you have the measurements, you should sew the bell bottoms. After you’ve cut them, you can use them as a spare pair of pants.